[Mesh] Meraki board watchdog

[J.C.]

sudo mesh has been working on this quite a bit, and potentially found some
work arounds, it would be great if there's any new info to add here
https://noisebridge.net/wiki/Sparky#Watchdog_problems.21


On Fri, Dec 20, 2013 at 10:05 AM, Adrian Chadd <adrian at freebsd.org> wrote:

> Hi,
>
> I've asked someone to send me one. I have the datasheets for the
> AR23xx stuff but I don't have any working hardware so I can't help
> diagnose what's going on.
>
> If I can get one of each of the CPU types then I can try to figure out
> what's going on. I'll also see if there's an external watchdog circuit
> somewhere.
>
> Thanks,
>
>
>
> -a
>
>
> On 20 December 2013 09:59, Dana <dana-lists at sonic.net> wrote:
> > Hello mesh folks,
> >
> > I took some donated Sparky boards from Noisebridge with the intention to
> use
> > them as wireless sensor nodes (environmental monitoring, etc) but while I
> > can get OpenWRT installed I run into problems with the hardware watchdog
> > rebooting the device every 5 minutes. It looks like OpenWRT includes
> support
> > for the ar2315 watchdog but something isn't working. Have you all found a
> > solution or workaround for this?
> >
> > Thanks, dana
> >
> >
> >
> > _______________________________________________
> > mesh mailing list
> > mesh at lists.sudoroom.org
> > http://lists.sudoroom.org/listinfo/mesh
> _______________________________________________
> mesh mailing list
> mesh at lists.sudoroom.org
> http://lists.sudoroom.org/listinfo/mesh
>



-- 
ThanX,
;+)

https://www.noisebridge.net/wiki/Fort
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://sudoroom.org/lists/private/mesh/attachments/20131220/27a1ecdd/attachment.html>