[sudo-discuss] very simple CNC plotter

[hol at gaskill.com]

most nailguns i've used have a safety element where the tip has to be
pressed against a surface (or of course have the contact sensor manually
pulled back) to actually send a nail 

On 2014-11-17 16:02, Jake wrote: 

> Hol do you really think it's a good idea to hand our evil robot a loaded nail gun? We should see how it behaves with a full-size router first...
> 
> On Fri, Nov 14, 2014 at 10:20 AM, <hol at gaskill.com> wrote:
> 
> i'd be into making some DIY insulated structural panels out of regular
> 4x8 plywood and styrofoam sheet. i actually randomly found a video of a
> motoman used as a pallet nailer. if we could fit a nailgun, housing
> panels could go together really quickly.
> 
> On 2014-11-14 13:37, Matthew Senate wrote:
> 
>> I think this is awesome, and a small-size CNC like this or a shapeoko model is still a great idea. (plus with a URL like that you HAVE to be DIYing it, so rad!) However, Jake pointed out that the giant robot arm can serve as a CNC mill that can reach a full 6' x 9' piece of plywood, meaning we can build stuff like this for instance: http://www.wikihouse.cc/ [1] [3] // Matt
 

Links:
------
[1] http://www.wikihouse.cc/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20141117/9a66cce0/attachment.html>