[sudo-discuss] very simple CNC plotter

[hol at gaskill.com]

i'd be into making some DIY insulated structural panels out of regular
4x8 plywood and styrofoam sheet. i actually randomly found a video of a
motoman used as a pallet nailer. if we could fit a nailgun, housing
panels could go together really quickly. 

On 2014-11-14 13:37, Matthew Senate wrote: 

> I think this is awesome, and a small-size CNC like this or a shapeoko model is still a great idea. (plus with a URL like that you HAVE to be DIYing it, so rad!) 
> 
> However, Jake pointed out that the giant robot arm can serve as a CNC mill that can reach a full 6' x 9' piece of plywood, meaning we can build stuff like this for instance: 
> 
> http://www.wikihouse.cc/ [3] 
> 
> // Matt 
> 
> On Fri, Nov 14, 2014 at 10:20 AM, <hol at gaskill.com> wrote:
> 
>> thought y'all might like to see this project someone put together on the cheap http://myhobbyprojects.com/drupal-7.16/?q=plotter [1] 
>> _______________________________________________
>> sudo-discuss mailing list
>> sudo-discuss at lists.sudoroom.org
>> https://lists.sudoroom.org/listinfo/sudo-discuss [2]
 

Links:
------
[1] http://myhobbyprojects.com/drupal-7.16/?q=plotter
[2] https://lists.sudoroom.org/listinfo/sudo-discuss
[3] http://www.wikihouse.cc/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20141117/9c894a31/attachment.html>