[sudo-discuss] Sudouino! - 1st draft PCB

[Steve Berl]

Do you have a schematic also?

Steve

On Friday, November 22, 2013, Hol Gaskill wrote:

> Hi Folks,
>
> Attached is a rough draft with a number of traces etc still to be
> resolved.  The idea is to have 3 of the PWM pins hardwired (but easy traces
> to cut if you want) to 3 power output pins so it can be used to power
> things right out of the box, with the rest of the I/O pins terminated to
> holes that you can either solder pin headers through to use on a
> breadboard, or just go ahead and solder to the devices you're trying to
> run.  Comments and suggestions welcome!  Also looking for input on size and
> mounting hole spacing.  Also interested in peoples' thoughts on whether to
> use special connectors for the I2C and SPI ports.
>
> Cheers,
> Hol
>
>

-- 
-steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20131122/86a1a7b9/attachment.html>