[Mesh] Firmware update

[Max B]

Great! Thanks for debugging all of that!

I'll flash a node and see If I can't set up the node configurator and
then try to figure out why luci isn't booting.

Max


On 12/23/2013 03:51 AM, Marc Juul wrote:
> Today I flashed the first router with sudomesh firmware and used the
> node-configurator to set it up. After fixing a few bugs, it now comes up
> mostly correctly after configuration(!)
> 
> Here are the remaining ToDos that I feel we need to deal with before I feel
> we can "ship" this as an initial launch:
> 
> * The simplified web gui does not allow me to log in. Trying to log in as
> root gives the error "The CGI process did not produce any response"
> 
> * Change meshrouting script to establish NAT between mesh and private wifi
> network.
> 
> * Add upstream traffic control to tunneldigger hook script.
> 
> * Hook web gui into batman-adv and tunneldigger for changes to shared
> internet bandwidth.
> 
> * Ensure that exit and relay nodes are configured correctly.
> 
> * Change MTU on interfaces to make batman happy.
> 
> Max: Any idea about the web gui error? Also, if you're trying to work with
> node-configurator, remember that the client only trusts the certificate
> included in the firmware here:
> 
> 
> https://github.com/sudomesh/openwrt-firmware/blob/master/files/etc/nodeconf/certs/ca_root.crt
> 
> The node-configurator client will refuse to connect to anything that
> doesn't have a cert signed by that root ca. Easiest solution for testing is
> to use the script included with node-configurator to generate your own root
> cert, copy that over the existing root cert in openwrt-firmware and re-run
> make in built_firmware/builder.atheros
> 
> 
> 
> _______________________________________________
> mesh mailing list
> mesh at lists.sudoroom.org
> http://lists.sudoroom.org/listinfo/mesh
>