[sudo-discuss] Electrical work currently being done for La Commune (affecting panel for Kitchen / Upstairs_

[Patrik D'haeseleer]

By the way, we do have a circuit tracer in CCL, in case anyone needs one.
You plug a little gizmo into a live outlet, or clip it onto a set of live
wires, and it send a small audio signal up through the wire that you can
detect at the breaker panel.

It's in the drawer labeled "tools" in one of the lab benches. The orange
gadget is the sensor. the small wall wart device is the transmitter.

Patrik

On Sat, Jan 31, 2015 at 8:46 PM, Steve Bloom <stevebloom55 at gmail.com> wrote:

> Thanks for posting this, David.
>
> Cover is on and the tripping problem should now be at least reduced since
> I was able to split the circuit such that the kitchen and den are on one
> breaker (now #7) and the hallways on another (#8).  In addition, the LC
> extension cord (to which the overhead light strings are attached) has been
> removed from that same circuit and put on #6, which is powering a temporary
> receptacle in LC that we're also using for our power tools.
>
> All nine of the other breakers are turned off since they're no longer
> doing anything, although I'm unwiring them only after confirming what
> they're actually attached to.  Most of these were to now-defunct lighting
> and power circuits in the bar area.  Next week several will be repurposed
> for new receptacle circuits in LC to be installed along the
> newly-sheetrocked walls.
>
> The note taped to the front of the panel now reflects this new condition.
>
> Some of these circuits are going to be hard to trace and if so will be
> left in place for the time being with the breaker off, so if anyone notices
> a loss of power to anything that was working as of last week, please let me
> know.
>
> If possible, I'll get the den onto a separate circuit from the kitchen.
>
> -- Steve
>
> On Sat, Jan 31, 2015 at 6:25 PM, David Keenan <dkeenan44 at gmail.com> wrote:
>
>> The tireless volunteers Steve Bloom ( stevebloom55 at gmail.com ) and I
>> believe Rayc ( what is is email - anyone know? )  are in the midst of
>> decommissioning electrical runs from to La Commune, from the panel in Rise
>> Above that also feeds the oft-tripping breaker to the upstairs.
>>
>> All, before touching this panel, please attempt to communicate first with
>> Steve or Rayc regarding whether it safe to do. Specifically, all, NEVER
>> reach your hand inside a panel that does not have a cover plate on
>> (covering the electrical wires and connections), even if it is only to flip
>> a breaker. Instead, at a minimum, put the cover plate back on first.
>>
>> This panel includes the oft-tripping breaker for the Kitchen and TIL etc
>> offices - #8, so please pay heed.
>>
>> Steve showed me that he decommissioned breakers # 7 & 11.
>> Breakers 3&4 were I believe decomissioned by an electrician hired by Rise
>> Above.
>> #8 is the one that always trips and needs to be worked on / rewired to
>> prevent this
>>
>> Please see the photo below for reference.. thanks!
>> [image: Inline image 1]
>>
>> David
>>
>
>
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss at lists.sudoroom.org
> https://lists.sudoroom.org/listinfo/sudo-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20150131/f11566e3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ElecSubPanel-forLaCommuneAndKitchen.jpg
Type: image/jpeg
Size: 107731 bytes
Desc: not available
URL: <http://sudoroom.org/pipermail/sudo-discuss/attachments/20150131/f11566e3/attachment.jpg>