[sudo-announce] Microcontroller Hacking begins in 48 hours!

[Steve Berl]

Just to clarify MY requirements a bit, the DirecTV radio telescope (
http://www.gb.nrao.edu/epo/ambassadors/ibtmanualshort.pdf) has a beamwidth
of about 3-5 degrees, so getting to within 1 degree would be great. I have
thought that the pan/tilt mounts used for larger traffic and surveillance
cameras would be perfect for this.
It also doesn't need to be fast. The first application is tracking the sun.
It needs to move at about 15 degrees/hour during the day. Overnight it has
to be able to swing back from the sunset position to the sunrise position,
but it's got all night to get there. Of course later on, or at night, we
might want to look at other things, and move from one celestial object to
another much more quickly.

Optical telescopes (and big radio telescopes) generally have much smaller
beamwidths/field of view, so pointing accuracy and smooth motion (to track
the apparent move across the sky for long exposure photography,etc) are
critical. For more info on telescope drive mechanisms check out
http://www.dfmengineering.com/news_telescope_gearing.html. Theres a lot of
good info there about precise pointing control of big heavy things. These
are the guys who made the control system for Nellie, the 36" reflector
telescope at Chabot Space & Science Center (www.chabotspace.org).

-steve



On Fri, Mar 29, 2013 at 3:13 PM, Scott Garrison <
scottrobertgarrison at gmail.com> wrote:

> I'd have to disagree on this one.  Servos have an encoder that allows the
> motor to know it's exact position.  Stepper motors will miss steps and
> won't be able to catch itself.  I guess this is an accuracy vs precision
> argument as at least the stepper motor is stable in it's adjusted position.
>
> If you are getting oscillations or wobbles in your position with a servo
> then most of the time you are sending it a corrupted signal.  This happens
> with microcontroller code whose servo libraries are not interrupt driven as
> the PWM signal gets corrupted by other processes.  Or with unshielded
> cables that are experiencing crosstalk from other wiring.
>
> As with all things the hardware has to be matched with the job though.  If
> your servo gears have lots of slop or aren't up to the job of positioning
> something heavy they will struggle.  It's possible to use a potentiometer
> as a secondary encoder of position to help if your gearing is introducing
> extra error.
>
> -=[Scott]=-
>
>
> On Fri, Mar 29, 2013 at 2:37 PM, David Rorex <drorex at gmail.com> wrote:
>
>> If you want ultra precise control, you need stepper motors. Or maybe
>> really expensive servos would work, but the cheap servo's I've used are
>> only accurate to a couple degrees and can wobble a little.
>>
>>
>> On Thu, Mar 28, 2013 at 3:13 PM, Scott Garrison <
>> scottrobertgarrison at gmail.com> wrote:
>>
>>> I'd be interested in doing something similar for controlling a camera.
>>>  I also have an extra house satellite dish that I would love to put to use.
>>>  I have experience controlling servos with microcontrollers.
>>>
>>> -Scott
>>>
>>>
>>> On Wed, Mar 27, 2013 at 3:07 PM, Steve Berl <steveberl at gmail.com> wrote:
>>>
>>>> I notice on the etherpad that someone is interested in a 2 axis control
>>>> for a radio dish. I'm interested in that also. In particular I want to
>>>> mount a house satellite TV dish sized antenna on a 2 axis mount for radio
>>>> astronomy use. It requires smooth and precise, but slow movement.
>>>>
>>>> Who is it that is interested in this project? Can you get in contact
>>>> with me?
>>>>
>>>> -steve
>>>>
>>>>
>>>> On Sun, Mar 24, 2013 at 5:43 PM, <hol at gaskill.com> wrote:
>>>>
>>>>> Howdy folks,
>>>>>
>>>>> We are two days away from the beginning of the second microcontroller
>>>>> project hacking night at sudo room.  As someone suggested, I created a
>>>>> facebookpage for the event.  Please invite people you think might be
>>>>> interested!  I previously ordered 10 ATMega328p chips and crystals, and
>>>>> will have them available at cost ($5) for those just starting out who want
>>>>> a basic controller.
>>>>>
>>>>> Event Link:
>>>>> https://www.facebook.com/events/502675869769339/
>>>>>
>>>>> Also, there is an etherpad to jot down projects you intend to work on
>>>>> in case anyone out there is interested in collaborating:
>>>>> https://pad.riseup.net/p/microbotics
>>>>> This will be an ongoing document, and is intended to provide a
>>>>> subsystem-level view of project elements in order to encourage people to
>>>>> join together to work on individual elements or principles where interests
>>>>> overlap in a way that permits a limited scope of collaboration, without
>>>>> having to commit to recurring work on an entire project.
>>>>>
>>>>> We had some interesting projects last time and I expect even more this
>>>>> time, hopefully with a few people from the last event returning to show
>>>>> what they've done with their projects since then.  Personally I will try to
>>>>> go back and forth between  50% working on 2-3 projects, 30% getting newbies
>>>>> started on their controller builds, and 20% snacking/shooting the shit.
>>>>>  Looking forward to seeing y'all!
>>>>>
>>>>> Cheers,
>>>>> Hol
>>>>> _______________________________________________
>>>>> sudo-announce mailing list
>>>>> sudo-announce at lists.sudoroom.org
>>>>> http://lists.sudoroom.org/listinfo/sudo-announce
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> -steve
>>>>
>>>> _______________________________________________
>>>> sudo-announce mailing list
>>>> sudo-announce at lists.sudoroom.org
>>>> http://lists.sudoroom.org/listinfo/sudo-announce
>>>>
>>>>
>>>
>>> _______________________________________________
>>> sudo-announce mailing list
>>> sudo-announce at lists.sudoroom.org
>>> http://lists.sudoroom.org/listinfo/sudo-announce
>>>
>>>
>>
>


-- 
-steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sudoroom.org/pipermail/sudo-announce/attachments/20130329/f35dd592/attachment-0001.html>