[Mesh] 5GHz report

[Max B]

Hi Deekoo,

Was part of this a report-back from trying to flash the sudomesh image on a picostation? If so, I would mention that I believe that eventually the config server should be setting up the account/password you're mentioning.

Deekoo <deekoo_3291a at deekoo.net> wrote:
>
>The NanoBridge doesn't show up on the lan at all for me - if I turn it
>on,
>usually the switch will have no link light and the feedhorn will have a
>link
>light; unplugging and replugging cables will sometimes switch this. 
>Other
>lights appear to go on correctly (power, reds and oranges if I reset
>it).
>
>The NanoBridge and NanoStation spec sheets says they expect 24v 0.5A
>PoE,
>while the injectors I've got are 15v 0.8a, which is what the
>PicoStation
>wants.  (The wiring is the same either way, pairs 4,5+ and 7,8 return.)
>
>The NanoStation is fine on a 15v 0.8A injector, though.
>
>Compiling for ar71xx gets me a binary that runs on the NanoStation. 
>Woot!
>Haven't yet been able to get the NanoStation radio into master mode,
>though.
>IIRC someone was working on open-source drivers for it under FreeBSD -
>what's
>the status of that?
>
>It looks like part of my patch is in the official firmware, but not all
>of
>it - the tweaks to telnetd and ntp hotplug aren't in.
>
>HTTP interface feedback: (running a bastard hybrid of my
>firmware and the github version, as of Dec 6):
>
>The default hostname is picostation-juul, regardless of actual hardware
>platform.
>
>On initial HTTP connection to a passwordless router, I get both a
>'No password set!' message instructing me to go to password
>configuration
>and an 'Authorization Required' dialog.
>
>The intuitive behaviour for me was to enter desired username and
>password
>in the big fat boxes, when apparently the CORRECT thing was
>to click 'Go to password configuration': which redirects to the
>identical-appearing page
>http://10.0.0.237/cgi-bin/luci/admin/system/admin
>
>At that point, I'm supposed to ignore 'Go to password configuration'
>and
>instead log in, at which point I'll have both the auth config screen
>and
>a message admonishing me to go to password configuration.
>
>When you scroll down to the bottom and click 'Save and apply', you get
>a very small notification that the password has been changed and a
>large
>'Applying changes' animation that was still running a couple hours
>later.
>ps showed no obvious sign of any processes related to the 'Applying
>changes'
>message, though I might have missed something.
>
>Typing your password twice (this time, on an actual picostation) and
>then
>pressing enter deletes your dropbear settings.  Bad from a usability
>perspective.  The deletion also appears to be persistent, while the big
>save buttons at the bottom would suggest that dropbear changes wouldn't
>take effect until you save & apply.
>
>Recommendations:
>1) Take the user straight to passphrase configuration if they try to
>admin
>a router without a passphrase set.
>2) Passphrase configuration should be just passphrase configuration;
>dropbear
>should have its own page.
>3) Status reports should be prominent and not interleaved with the
>rest of the design.
>4) Links should be underlined and coloured; bold alone is too subtle.
>5) Call it 'passphrase' rather than 'password', so we get more correct
>horse
>battery staples and fewer swordfish.
>_______________________________________________
>mesh mailing list
>mesh at lists.sudoroom.org
>http://lists.sudoroom.org/listinfo/mesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://sudoroom.org/lists/private/mesh/attachments/20131208/cc778464/attachment.html>